Hori hayabusa actuator linear

images hori hayabusa actuator linear

Taeyoung is the original Fanta stick of which production has long since been halted but eTokki started reproducing them recently so now you can get one through their store if you missed out on it and never had a copy. LS is the more solid option of the two in my opinion, but if you can live with the short engage distance of LS without it giving you input errors, it's a good joystick as well and more customizable because it comes with a shaft cover. That one does NOT get used. Your email:. On a japanese stick this is practically impossible to do because you hit the corner and know that you have reached downforward. The gates are only customizable on Japanese sticks.

  • Shorten Hori Hayabusa Throw Tech Talk Shoryuken Forums
  • Kowal 1mm Oversize Actuator for Sanwa JLF series joystick
  • Joystick primer BasedAisk
  • What works with the Hori Hayabusa – Focus Attack LLC

  • Shorten Hori Hayabusa Throw Tech Talk Shoryuken Forums

    I'm using this actuator with both a Sanwa JLF and Hori Hayabusa joystick paired this with an an octogonal gate and it feels a lot better imo, specially in the Hori. It seems the control panel PCB blocks the Hayabusa mount.

    Further, the Q. Can you use the Kowal 1mm oversized actuator on the Hayabusa. I've been recently thinking of buying an over-sized actuator and heavier since sanwa sticks have a linear pull vs korean sticks spring more to neutral the more.
    For 3D games it's a bit finicky, but if Japanese Tekken pros perform well with their JLFs there's no reason you shouldn't be able to do the same.

    Kowal 1mm Oversize Actuator for Sanwa JLF series joystick

    Compared to JLF it doesn't feel as smooth but that makes it feel more precise and responsive and this in turn makes movement in games like Tekken much easier compared to stock JLF and gives you less movement errors while you can still easily perform fast motions in 2D games effortlessly.

    But on the ls, u could ride the hell out of that gate, the thing would just pop back to neutral after df. Taeyoung is the stick you use when you have played with it for the past 20 years in Korean arcades. When I try to put the Hayabusa in my case it doesn't fit due to the buttons usually this is with Qanba sticks A. Crown joysticks' plates follow the japanese layout as well but the ones with full collar, as well as other Korean joysticks, don't, so for these you need to get a special plate you can mount them with.

    Joystick primer BasedAisk

    Here's a picture of the installation:.

    images hori hayabusa actuator linear
    Hori hayabusa actuator linear
    Comment by aisk It's fine for fighting games as well as the short throw can make motions easier to perform since you don't need to move your joystick as much when riding the gate. Alexis on Apr 16th If you don't want to go as far as changing the PCB, you can also use a converter that for example makes PS3 stick work on PS4 but this generally adds an extra frame of input delay.

    Try the actuators on both sticks first, you would be astonished, trust me, I was right where you are a year ago.

    Video: Hori hayabusa actuator linear Sanwa JLF vs Hori Hayabusa vs Seimitsu LS-32 : Joystick Centering and Wobble

    Engage is how far you push the stick neutral to where it engages a direction and throw is how far it travels before hitting the gate. LS can possibly be the most precise stick out there as long as u can get used to the short throw.

    Yes, you will want an actuator that tightens the engage and the throw since the Hayabusa's engage points are already further apart than the JLF's. But I also.

    images hori hayabusa actuator linear

    Japanese sticks all use springs inside the actuators to give their sticks The third company in the market is Hori who developed their Hayabusa stick for. gradually harder whereas when using spring the resistance is linear. 8. Linear Actuators and Control Boxes -Progressive Automations 10.

    Video: Hori hayabusa actuator linear Hori Hayabusa joystick spring mod

    How To Mod A FightStick | HORI Hayabusa | Qanba Q1 | Sanwa 30mm Silent.
    For customizing the looks you can get a different top and a shaft- and dust cover set in different colors. Related Products. Other moves such as jump cancel specials canceling the pre-jump frames of a super jump into a special attack, common with UMVC3 are easier to perform.

    images hori hayabusa actuator linear

    For more advanced modding you can get a PCB to replace the one in your arcade stick. These are good as an introductory to Korean sticks however before you decide whether or not you want to destroy your arcade stick by drilling a 35mm hole into it to get into the big boy sticks.

    images hori hayabusa actuator linear

    When I try to put the Hayabusa in my case it doesn't fit due to the buttons usually this is with Qanba sticks.

    images hori hayabusa actuator linear
    Hori hayabusa actuator linear
    Showing reviews of 61 Next Page.

    What works with the Hori Hayabusa – Focus Attack LLC

    Leave slack on the original cable for mistakes. Either way, I remember on the Hayabusa Unboxing thread guys went into length on it. Learn more. It's a mess anyway and not very customer friendly implementation. The spring inside the joystick is slightly more heavy than in JLF which makes it harder to move compared to stock JLF but not by much, and similarly to Hayabusa, it uses Panasonic's AM5 microswitches but a different levered model that is more lighter to activate which comes similiar to the feel of Omron switches.

    5 thoughts on “Hori hayabusa actuator linear”

    1. The throw distance of the stick is on the medium size but that mixed in with the lightness of the spring and the Omron microswitches that are among the lightest out there, allows for some quick, precise inputs making it great for 2D games.

    2. Trust me, the difference is night and day! Japanese sticks all use springs inside the actuators to give their sticks their resistance which on stock products are usually light, so they are easy to move around.

    3. Arcade sticks use the japanese layout so all the japanese joysticks can be mounted into the arcade stick using their default plates.

    4. Not a fan of circle or octo. It is designed in a lightweight nylon material, and its non-tapered shape allows the actuator to engage switches consistently.